MTS Systems TFIR-31LAN series, Руководство по эксплуатации

Страница: 57 / 104

- 55 -
5.4 Output trace information
The TFIR-31LAN series image reader has the function of recording the trace. To get
the trace information, sending the serial command as shown below.
This information can help to analyze the reason of No Read and trouble, etc.
Trace data include the following contents:
1 TCP/IP connections : Connect, Disconnect
2 Change history of settings : Serial command
3 Symbol information : Decoded data (first 20 bytes)
4 Error log : Error log
5 Read score : OK / NG / SYNC
6 No Read : Record only if the number of read symbol less than
“LABELS”.
7 SYNC on/off : External trigger
8 Received data : Received data except serial command
9 Camera settings : Illumination and shutter speed, etc.
10 Membrane switch : Teach and Read button operation
11 Boot log : Mode name, Firmware version
12 Output data : Output of decoded data
13 LAN settings : LAN settings
(Output format)
23.385679 , 3 , ” QR-CODE123”,QR Code, 127ms
Type Command
Boot trace PRNTBOOT[CR]
Log trace PRNTLOG[CR]
Output trace PRNTOUTPUT[CR]
Elapsed time from Power-on reset (second)
Log number Log contents