MTS Systems TFIR-31LAN series, Руководство по эксплуатации

Страница: 54 / 104

- 52 -
5.3 Save Image
Up to 4 images can be stored to internal memory (Buffer #1 to #4).
The images need to be transferred to a host before turing off the power to the reader.
The images will be deleted from the internal memory when turning the power off.
Select type of image to be saved as follows:
- Image of Good Read
- Image of No Read
- Captured image (Raw image)
- Decoded image (Using the function of image preprocessing.)
Default settings:
IMGSAVE=1[CR] (*) : Save image of No Read.
IMGSEL=1[CR] (*) : Save preprocessed image when this function is enabled.
IMGFULL=1[CR] (*) : After images are stored in buffer from #1 through #4, latest
images will be overwritten in buffer #4.
To delete the image, send the “IMGCLEAR” command to the reader.
5.3.1 Select type of save image
Select type of image to be saved as follows:
IMGSAVE=0[CR] : Disable this function
IMGSAVE=1[CR] (*) : Save image of No Read
IMGSAVE=2[CR] : Save image of Good Read
IMGSAVE=3[CR] : Save image of Good Read and No Read
5.3.2 Save preprocessed image
IMGSEL=0[CR] : Save captured image (Raw image)
IMGSEL=1[CR] (*) : Save decoded image
In case of “IMGSEL=1”, the flame number used in cycle buffer memory need to be
identified.
OKFRAME=0[CR] (*) : Decoded image
OKFRAME=1 to 4[CR] : The image stored in the specified memory in
case of Good Read.