MTS Systems TFIR-31LAN series, Руководство по эксплуатации

Страница: 83 / 104

- 81 -
7.4 Camera Control (1) (for Fixed Gain and Automatic Gain Control Mode)
Term Command Description
Camera Control
Mode AGC=D
AGC=E Set in Fixed Gain Mode
Set in Automatic Gain Control Mode
Capture area CAPMODE=
Left,
Top,
Width,
Height Capture area
Left 0 to 751 0
(*)
Top 0 to 479 0
(*)
Width 1 to 752 752
(*)
Height 1 to 480 480
(*)
Decode area DECMODE=
Mode,
Left,
Top,
Width,
Height Decode area
Mode 0; Disable 1; Enable (*)
Left 0 to 751 0
(*)
Top 0 to 479 0
(*)
Width 1 to 752 752
(*)
Height 1 to 480 480
(*)
Note:
Mode=0; The reader decodes in the Decode area.
Mode=1; The reader decodes in the Capture area.
Illumination
Control LIGHT=a a=2; Internal illumination is OFF
a=3; Internal illumination is ON (with pulsed operation) when
capturing
(*)
Illumination
Intensity CAMbrightness=a Brightness level is set in 50 steps
a : 0 to 50 (0 : Off, 50
(*)
: Brightest)
Internal
Illumination CAMled=c,b Set the type of internal illumination source
TFIR-31LAN-H
(Both type spot and diffused can be used in reading)
c=0; Disable spot type
c=1; Enable spot type
b=0; Disable diffused type b=1; Enable diffused type
TFIR-31LAN
(Both spot type A and B can be used in reading)
c=0; Disable spot type-B
c=1; Enable spot type-B
b=0; Disable spot type-A b=1; Enable spot type-A
Shutter Speed SHUTT=a a=0 to 8
0; 1/60 [sec]
(*)
1; 1/125 2; 1/250
3; 1/500 4; 1/100 5; 1/2000
6; 1/4000 7; 1/6000 8; 1/8000
Extra gain value GCV=a
a=1 to 15 a=10
(*)
Black Level
adjustment CAMblack=a a=0 (*); Disable
a=-127 to +127
Image
Preprocessing IPFUNC0=
a,b,c,d,e Set the type of preprocessing a,b,c,d,e =0,0,0,0,0
(*)
a,b,c,d,e; (Refer to section 7.8)
Mirrored image MIRROR=a a=0; Read only normal type (not mirrored)
(*)
a=1; Read only mirrored type
a=2; Read normal type and if it fails, try to read it as mirrored type
a=3; Read mirrored type and if it fails, try to read it as normal type