EN - 4
Control
◆
Function Summary
KD59E can provide a lot of functions to fit the users’ need. The indicating contents
are as following:
•
Smart battery indicator
•
Assistance-level indicator
•
The push-assistance function
•
The Lighting On/Off (optional
）
◆
Button Definition
There are three buttons ( , , ), on the KD59E display that represented by the following
functions respectively MODE,
„+“
a
„
-
“
.
◆
Switching the eBike System On/Off
To switch on the eBike system, hold the MODE button for 2s.
In the same way to hold the MODE button for 2s again, the eBike system will be switched off.
When switching off the eBike system the leakage current is less than 1 uA.
When parking the eBike for more than 10 minutes, the eBike system will switches off automatically.
◆
Switching the Lighting On/Off
To switch on the display headlight of the eBike, hold the button for 2s. The battery indicator light
and power assistant level indicator light became faint at the same time.
In the same way to hold the button for 2s again, the headlight will be switched off.
If the front or rear light is not connected, the button can only be used to switch the display backlight on
/ off.
◆
Switching Push-assistance mode On/Off
To access the push-assistance mode, hold the button always, the eBike will go on at a uniform
speed of 6 Km/h (3.7 mph). Three power-assistance level indicator lights flash at the same time.
The push-assistance function switches off as soon as you release the button.
Push-assistance function may only be used when pushing the eBike. Danger of injury when the wheels
of the eBike do not have ground contact while using the push-assistance function.
◆
PAS Level Selection
Assistance level indicates the output power of the motor. The default value is level “1”.
Press the or button to select power assistant level, the
default power ranges from level “0” to
level “
5
”. The output power is zero on Level “0”. Level “1” is the minimum power. Level “
5
” is the
maximum power.
◆
Battery Indicator
The five battery bars represent the capacity of the battery. The four green lamps are lighting when
the battery is in high voltage. When the battery is in low voltage, the left lamps will be red to notice
that the battery needs to be recharged immediately.
Beware of safe use. Do not attempt to loosen or reconnect the connector while charging the battery or
while the battery power is on.
Avoid the risk of electric shock.
Do not subject the display to shocks.
Do not modify system parameters to avoid parameter mismatch.
