EN - 17
◆
Power-on password enable/disable
In “Start PassWord” interface, choose ‘ON’ and short press(less than 0.5S)
to confirm.
Meanwhile, display interface prompts for a password. Press or button to shift numbers from 0
to 9 and press ON/OFF to confirm and input the next digit. After the input is done, the interface will
prompt for entering the password again. If two inputs are consistent, the system prompts that the
password is set successfully. If two inputs are inconsistent, the first input is to be repeated and
confirm the new password again. The interface will be redirected to original settings page 2
seconds after the password is set successfully. Hold button for more than 2 seconds to exit to
the main page or by route’ BACK’ →’EXIT’. The operation steps
are as follows:
Password enable/disable confirmation interface
◆
Password Reset
When password is enabled, ‘Reset password’ will add to Password interface. Press(less than 0.5s)
/
button to choose ‘Reset Password’ and press(less than 0.5s)
to confirm. Meanwhile, the
interface prompts for current password input. The display will be powered off automatically when
the password is entered incorrectly after 10 inputs. When a correct password is input, the interface
prompts for a new password. Then follow the operations of setting a new password. The interface
will be redirected to original settings page 2 seconds after the password is reset successfully. Hold
button for more than
2 seconds to exit to the main page or by route’ BACK’ →’EXIT’. The
operation steps are as follows:
Password reset interface
