EN - 18
◆
Password Disable
In “Start PassWord” interface, choose ‘OFF’ and short press (less than 0.5
s) to confirm.
Meanwhile, display interface prompts for a password. The display will be powered off automatically
when the same password is entered incorrectly after 10 inputs. When a correct password is input,
the display will give a prompt of ‘password function disabled’. After 2 seconds,
the interface will be
redirected to original settings page. Hold button for more than 2 seconds to exit to the main page
or by route’ BACK’ →’EXIT’. The operation steps are as follows:
■
If there is no operations in one minute; the display will exit the settings state.
Beware of safe use. Do not attempt to loosen or reconnect the connector while charging the battery or
while the battery power is on.
Avoid the risk of electric shock.
Do not subject the display to shocks.
Do not modify system parameters to avoid parameter mismatch.
If an error code is displayed, have the display repaired.
THIS VERSION OF THE OPERATING INSTRUCTIONS IS INTENDED FOR UNIVERSAL USE FOR
KD218 DISPLAYS. SOME VERSIONS OF THE DISPLAY SOFTWARE WILL DIFFERENT DEPENDING
ON THE SPECIFICATIONS. ALWAYS USE THE CURRENT VERSION.
