EN - 22
◆
Walk Assistance
Activation: Press the button until this symbol
appears. Next hold down the button whilst
the
symbol is displayed. Now the Walk assistance will activate. The symbol
will flashes and
the pedelec moves approx. 6 km/h
(3.7 mph)
. After releasing the button, the motor stops
automatically and switches back to level 0.
The walking assistant function can only be used when pushing the bike.
Attention! There is a risk of injury if the rear wheel does not come into contact with the ground when
using the Walk Assist.
◆
Service
The display shows "Service" as soon as a certain number of kilometers or battery charges has
been reached. With a mileage of more than 5000 km (3100 mi) (or 100 charge cycles), the
“Service" function is displayed on the display. Every 5000 km
(3100 mi) the display "SERVICE" is
displayed every time. This function can be set in the display settings.
Settings
◆
Interface setup procedure
Unit
Service Tip
Brightness
Auto Off
MAX PAS
Power View
SOC View
TRIP Reset
AL Sensitivity
Password
Set Clock
BACK
Wheel Size
Speed Limit
Battery Information
Controller Information
Display Information
Torque Information
BACK
