CAUTION
!
NOTE
CAUTION
!
Familiarize yourself with its operation before
switching on the device.
Caution with the high voltage switched! Do not
touch the gun nozzle.
Do not stand in front of the spray gun!
Set up the pistol never against people!
Before you begin the installation and commis-
sioning, take a moment to familiarize yourself with
the relevant manual books.
Check that all components are provided for
mounting
The structure is the same for both, the MS
Tribo and the MS Corona powder spray gun. The
control module automatically detects which type of
gun is attached.
For the operation of the powder coating system
a high quality of compressed air is necessary. See
chapter technical data.
The mains connection of MS powder coating
device must be electrically interlocked with the
exhaust system of the powder coating. The powder
coating device must be switched on only when the
cabin is running. Set the air conditioning off, and
the powder coating device must be switched off.
For the assembly of the powder spray the con-
trol module is disconnected from the grid witch the
power plug.
The supplied earthing cable (green / yellow) must
be connected to the earthing screw of the electrostatic
manual powder coating equipment. The grounding
cable must have good metallic connection with the
coating cabin, the recovery unit and the conveyor
chain or the suspension of the objects and must be
connected to the potential equalization of the building.
Not used connections must be protected by
the caps.
Observe safety regulations
COMMISSIONING AND
OPERATION OF MS TOPCASE
S4 CONTROL MODULE
INSTALLATION
PA-18-02-R0 (08/2018)
32 / 52
www.carlisleft.com
INSTALLATION
EN
