OPERATION
On the back of the manual powder spray gun is a control
panel. With this, the programs can be changed and the
amount of powder can be adjusted. By pressing the arrow
keys you can switch between program changes and powder
quantity settings.
You can switch between the powder
mode and the program mode
You can switch
between the powder
mode and the
program mode
Illuminates when
the gun is ready
for coating
Increasing amount of
powder / Program change
Reduce amount of powder /
Program change
CONNECTING MANUAL
POWDER GUN
The powder hose we connect via a quick coupling. This
enables a rapid plugging and unplugging powder hose by
a spring.
The electrical connection is permanently assembled.
1 - Quick disconnect button
2 - Powder hose connection
3 - Gun air connection
4 - Controller cable electrical connector
CONNECTABLE CONTROLLERS
MS TOPCOAT MANUAL
POWDER GUN
The MS Topcoat manual powder spray gun may only be
operated with one of the following controllers:
• MS Topcase Basic (615300)
• MS Topcoat Deluxe (615305)
• MS Module (610189-10)
3
4
1
2
WA R N I N G
!
These devices may be used only for the applica-
tion described above.
WA R N I N G
!
Do not unplug the electrical plug. The power must
be turned off at the control unit before unplugging the
cable.
PA-18-02-R0 (08/2018)
47 / 52
www.carlisleft.com
EN
INSTALLATION
