INE-
DZB-712
Portable
Multi-parameter
Analyzer
8
Meter can mostly measure 3 main parameters simultaneously. When you finish selection, press
‘ENTER/MENU ’ key, meter will save the setting and return to starting state, press ‘CANCEL’ key
meter will quit from the operation and return to starting state directly.
Example 2:
Unit name: Data input
In many cases, you need to set necessary parameter. Meter has an effective data input method in
the condition of only five keys in using. In order to let user familiar with this data input method,
meter has only way of parameter setting which is displayed as the diag.
On the top is required parameter name.
On upper side is present data input area that black cursor
is flashing.
On left lower side is a little figure keypad
On right lower side is a reflection area of present key
position.
At the bottom are the pressing keys, you can move
up/down, right/left by pressing ‘F1’ and ‘F2’.
At the same time the indication on top of ‘F3’ will automatically follow up and change. When you
input any figure, the ‘-’ on keypad will be automatically amended to ‘C’ which means you can clear
previous input, in case you move keypad to this point and press ‘F3’ (at this time the indication of
‘
INPUT
’ will be changed to ‘CLEAR’), you can delete all of previous input and re-input. If there is
any mistake, you can amend according to this.
Ex: input data 12.6
Operation step:
a). Firstly
，
on top of ‘F3’ will be number ‘1’,
press F3 directly, input digit ‘1’
b). Press F1 when top of ‘F3’ number is‘2’,
press F3 input digit ‘2’
c). Press F1 twice when top of ‘F3’ number is ‘.’ ,
press F3 input digit ‘.’
