compartment.
3. Locate the dark blue wire with yellow tracer (Output Shaft Speed Sensor) on Pin 14 (2005 – 2006 Expedition),
Pin 25 (2004 Expedition) or Pin 14 (F-150) of C175T on the Powertrain Control Module (PCM).
4. Using a scotch-lock t-tap and male quick-slide terminal, connect the red wire of the VSS cable to the vehicle
OSS wire.
5. Connect the black wire of the VSS cable to a vehicle chassis ground.
6. Secure all cables and proceed to accuracy test.
Ford Expedition 2007 – 2008
1. Connect the universal VSS cable to the radar’s power/signal cable.
2. Route the blunt cut end of the universal VSS cable through the firewall into the passenger’s side engine
compartment.
3. Locate the yellow wire with blue tracer (VSS OUT) at pin 63 of connector C175B on the Powertrain Control
Module (PCM) at the passenger-side firewall.
4. Using a scotch-lock t-tap and male quick-slide terminal, connect the red wire of the VSS cable to the vehicle
OSS wire.
5. Connect the black wire of the VSS cable to a vehicle chassis ground.
6. Secure all cables and proceed to accuracy test.
36
