Chevrolet 2500HD Pickup with 4.8L, 5.3L, 6.0L and 6.2L gas engine 2008
1. Connect the universal VSS cable to the radar’s power/signal cable.
2. Route the blunt cut end of the universal VSS cable through the firewall into the driver’s side engine
compartment.
3. Connect the red wire of the MPH speedometer interface cable to the yellow/black wire on pin 57 of connector
X1 on the engine control module.
4. Connect the black wire of the VSS cable to a vehicle chassis ground.
5. Secure all cables and proceed to accuracy test.
Ford Explorer 2005-2006
1. Connect the universal VSS cable to the radar’s power/signal cable.
2. Route the blunt cut end of the universal VSS cable through the firewall into the passenger’s side engine
compartment.
3. Locate the dark blue wire with yellow tracer (2005) or yellow wire with orange tracer (2006) Output Shaft
Speed Sensor wire on Pin 3 of C175t on the Powertrain Control Module (PCM).
34
