Chevrolet Tahoe 2007 – 2008
1. Connect the universal VSS cable to the radar’s power/signal cable.
2. Locate the 22 gauge Dark Green/White (VSS) in the blunt cut ignition controlled voltage and signal wires
included in a wire loop located under the instrument panel in near the center of the vehicle.
Note: The other
wires in this harness are yellow, pink and yellow/black.
3. Using a scotch-lock t-tap and male quick-slide terminal, connect the red wire of the VSS cable to the vehicle
VSS wire.
4. Connect the black wire of the VSS cable to a vehicle chassis ground.
5. Secure all cables and proceed to accuracy test.
33
