Moxa Technologies AirWorks AWK-1137C Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 113

background image

AirWorks AWK-3131A

Web Console Configuration

3-15

For a higher level of security, the password parameter can only be viewed over HTTPS by a user with an

Admin

account. No user can read the password over HTTP, not even an

Admin

account.

The

Channel

value displays the current channels that the AeroMag APs are operating in. The channel set is

updated when the AeroMag APs change their operating channels triggered by the

Refresh Channel

function.

AeroMag can view a topology where the wireless devices with the same SSID are grouped together. If you need
to assign a specific SSID to devices, you must first deactivate AeroMag and then change each AWK's SSID. The
new SSID for each device will become the group index the next time you activate the AeroMag function.

If AeroMag clients are trying to join a topology that has been locked by AeroMag, they will see the

Block

status.

To add new units to an existing AeroMag topology, you must first unlock the topology.

NOTE

1.

AeroMag client CANNOT search and connect to a normal AP because of a null configuration during the
search.

2.

When AeroMag APs discard their configuration due to a group merge, the corresponding AeroMag clients
will also discard their configuration and reboot to search for new AeroMag APs.

3.

If an AeroMag client is disconnected from an AeroMag AP and fails to find an AeroMag AP in the Turbo
Roaming channel within 150 seconds, the client starts to scan all channels for AeroMag APs to recover its
AeroMag connection.

4.

If an AeroMag client loses a connection for 10 minutes and fails to connect again, the AeroMag client
discards the current configuration, reboots, and starts searching for AeroMag APs all over again.

5.

If an AeroMag client is informed that the Turbo Roaming channel needs to be changed due to the

Refresh

Channel

being triggered by AeroMag APs, the Wi-Fi connection with the clients will be disconnected for 180

seconds until it is reconnected to the APs.

6.

If an AeroMag client is blocked outside an existing AeroMag group for 5 minutes, the AeroMag client will
reboot and search for another AeroMag AP.

7.

AeroMag devices in a network must operate in the same regulatory band. For example, if one AeroMag unit
uses US band and the other units use EU band, AeroMag will fail to establish a network topology.

Operation Mode

The AWK-1137C supports four operation modes—Client, Client-Router, Slave, and Sniffer—each of which plays
a distinct role in a wireless network.

Wireless enable

Setting

Description

Factory Default

Enable/Disable

The RF (Radio Frequency) module can be manually turned on or
off.

Disable

«
...
27
28
29
30
31
...
»

Содержание AirWorks AWK-1137C


















































































































Отзывы:

Нет отзывов

Похожие инструкции для AirWorks AWK-1137C

Бренд: D-Linke Страницы: 32

Бренд: Patton electronics Страницы: 2

Бренд: Patton electronics Страницы: 16

Бренд: Patton electronics Страницы: 51

neutrino series

Бренд: Xilica Audio Design Страницы: 26

TOWERCHRON DP72

Бренд: Grasslin Страницы: 2

Бренд: VMIC Страницы: 126

nForce 680I LT SLI

Бренд: Nvidia Страницы: 80

Бренд: Zoom Страницы: 88

Бренд: E-Lins Страницы: 9

Бренд: Nvidia Страницы: 115

Бренд: ZyXEL Communications Страницы: 2

Бренд: EMCIS Страницы: 14

Бренд: Renesas Страницы: 20

Бренд: ZALMAN Страницы: 9

Бренд: Caton Страницы: 18

HIRESCHMANN IT MAMMUTHUS MTM8003-FAN

Бренд: Belden Страницы: 84

Mercury FireWire 400

Бренд: OWC Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды