Moxa Technologies AirWorks AWK-1131A Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 82

background image

AirWorks AWK-1131A

Web Console Configuration

3-29

Link fault pass-through LAN/WLAN
disconnected because of WLAN/LAN down

The WLAN/LAN link is down and the Link fault pass-through (LFPT)
disables the LAN/WLAN functionality.

Channel availability check over DFS
frequency (for AP/Master mode)

The channel availability check (CAC) is started on channel
[channel] at [frequency] GHz for 60 sec./
The channel availability check (CAC) task has been completed on
channel [channel] at [frequency] GHz./
A radar signal is detected on channel [channel] at [frequency]
GHz.

AeroLink protection state

The AeroLink protection state changes.
AeroLink states: Initialize (init)/ Discovery/ Idle/ Negotiation
(nego)/ Back up/ Active/ Changed/ Undefined (undef)

Configuration-related events

Event is triggered when…

Configuration Changed

A configuration item has been changed.

Configuration file import via Web Console The configuration file is imported to the AWK-1131A.
Console authentication failure

An incorrect password is entered.

Firmware upgraded

The AWK-1131A’s firmware is updated.

Loaded the configuration from ABC-01

The configuration is successfully loaded/there is an error loading
the configuration from ABC-01.

Saving configuration to ABC-01

The configuration is successfully saved/there is an error saving the
configuration to ABC-01.

ABC-01 failure

AWK-1131A cannot detect an ABC-01 at the console port.

Configuration reset to default

The configuration is reset to factory default.

Power events

Event is triggered when…

Power 1/2 transition (On -> Off)

The AWK-1131A is powered down in PWR1/2.

PoE transition (On -> Off)

The AWK-1131A is powered down in PoE.

Power 1/2 transition (Off -> On)

The AWK-1131A is powered via PWR1/2.

PoE transition (Off -> On)

The AWK-1131A is powered via PoE.

Syslog

This function provides the event logs for the Syslog server. The function supports up to three configurable
Syslog servers and Syslog server UDP port numbers. When an event occurs, the event will be sent as a Syslog
UDP packet to the specified Syslog servers.

Syslog Event Types

The event type groups are shown on this page. Select the

Enable Logging

checkbox next to the event type to

enable logging of the event. By default, all event types are enabled (checked).

«
...
44
45
46
47
48
...
»

Содержание AirWorks AWK-1131A



















































































Отзывы:

Нет отзывов

Похожие инструкции для AirWorks AWK-1131A

Бренд: D-Link Страницы: 9

Бренд: D-Link Страницы: 52

DWL-3140AP - Web Smart PoE Thin Access Point

Бренд: D-Link Страницы: 16

DWL-3140AP - Web Smart PoE Thin Access Point

Бренд: D-Link Страницы: 46

DWL-2100AP - AirPlus Xtreme G

Бренд: D-Link Страницы: 29

DWL-2100AP - AirPlus Xtreme G

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 37

Бренд: D-Link Страницы: 10

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 32

D DWL-8200AP DWL-8200AP

Бренд: D-Link Страницы: 10

D DWL-8200AP DWL-8200AP

Бренд: D-Link Страницы: 97

D DWL-8200AP DWL-8200AP

Бренд: D-Link Страницы: 16

D DWL-8200AP DWL-8200AP

Бренд: D-Link Страницы: 129

AirPremier DWL-7700AP

Бренд: D-Link Страницы: 12

AirPremier DWL-7700AP

Бренд: D-Link Страницы: 84

Бренд: D-Link Страницы: 76

Бренд: D-Link Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды