Moxa Technologies AirWorks AWK-1131A Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 82

background image

AirWorks AWK-1131A

Web Console Configuration

3-13

Key index

Setting

Description

Factory Default

1-4

Specifies which WEP key is used

Open

WEP key 1-4

Setting

Description

Factory Default

ASCII type:
64 bits: 5 chars
128 bits: 13chars
HEX type:
64 bits: 10 hex chars
128 bits: 26 hex chars

A string that can be used as a WEP seed for the RC4 encryption
engine.

None

WPA/WPA2-Personal

WPA (Wi-Fi Protected Access) and WPA2 provide significant improvements over the WEP encryption method.
WPA is a security standard based on 802.11i draft 3, while WPA2 is based on the fully ratified version of 802.11i.
The initial vector is transmitted, encrypted, and enhanced with its 48 bits, twice as long as WEP. The key is
regularly changed so that true session is secured.

Even though AES encryption is only included in the WPA2 standard, it is widely available in the WPA security
mode of some wireless APs and clients as well. The AWK-1131A also supports AES algorithms in WPA and WPA2
for better compatibility.

Personal versions of WPA/WPA2, also known as WPA/WPA-PSK (

Pre-Shared Key

), provide a simple way of

encrypting a wireless connection for high confidentiality. A

passphrase

is used as a basis for encryption

methods (or cipher types) in a WLAN connection. The passphrases should be complicated and as long as
possible. There must be at least 8 ASCII characters in the Passphrase, and it could go up to 63. For security
reasons, this passphrase should only be disclosed to users who need it, and it should be changed regularly.

WPA type

Setting

Description

Factory Default

Personal

Provides Pre-Shared Key-enabled WPA and WPA2

Personal

Enterprise

Provides enterprise-level security for WPA and WPA2

Encryption method

Setting

Description

Factory Default

TKIP**

Temporal Key Integrity Protocol is enabled

AES

AES

Advance Encryption System is enabled

Mixed*

Provides TKIP broadcast key and TKIP+AES unicast key for
some legacy AP clients. This option is rarely used.

** This option is only available with 802.11a/b/g standard
* This option is available for legacy mode in AP/Master only, and does not support AES-enabled clients.

«
...
28
29
30
31
32
...
»

Содержание AirWorks AWK-1131A



















































































Отзывы:

Нет отзывов

Похожие инструкции для AirWorks AWK-1131A

Бренд: UNICOM Страницы: 1

WG602v3 - Wireless Access Point

Бренд: NETGEAR Страницы: 2

Бренд: LevelOne Страницы: 33

Бренд: Gemtek Systems Страницы: 13

Бренд: E-Lins Страницы: 52

Бренд: Aruba Страницы: 2

Бренд: EnGenius Страницы: 117

Бренд: Arista Страницы: 4

WLTMS-110_384041

Бренд: Gemtek Systems Страницы: 14

Бренд: Pioneer Страницы: 6

Бренд: Air Live Страницы: 160

Бренд: P2 MOBILE TECHNOLOGIES LIMITED Страницы: 5

Бренд: D-Link Страницы: 159

Бренд: Noga net Страницы: 44

Бренд: Ebyte Страницы: 10

Бренд: Sierra Wireless Страницы: 136

Бренд: Sierra Wireless Страницы: 172

Бренд: Sierra Wireless Страницы: 180

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды