Moxa Technologies AirWorks AWK-1131A Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 82

background image

AirWorks AWK-1131A

Web Console Configuration

3-28

Logs and Notifications

Since industrial-grade devices are often located at the endpoints of a system, these devices will not always
know what is happening elsewhere on the network. This means that these devices, including wireless APs or
clients, must provide system maintainers with real-time alarm messages. Even when system administrators
are out of the control room for an extended period, they can still be informed of the status of devices almost
instantaneously when exceptions occur.

In addition to logging these events, the AWK-1131A supports different approaches to warn engineers
automatically, such as SNMP trap and e-mail.

System Logs

System Log Event Types

All the event group types are shown on this page. Select the event types (groups) that you want to enable by
checking the

Enable logging

box next to the event types. By default, all event types are enabled (checked).

The system events log can be viewed at

Status



System Logs

.

System-related events

Event is triggered when…

System warm start

The AWK-1131A is rebooted, such as when its settings are
changed (IP address, subnet mask, etc.).

System cold start

The AWK-1131A is rebooted by power down.

Watchdog triggers reboot

The AWK-1131A is rebooted by watchdog

Network-related events

Event is triggered when…

LAN link on

The LAN port is connected to a device or network.

LAN link off

The port is disconnected (e.g., the cable is pulled out, or the
opposing device shuts down).

Client joined/ left
(for AP/Master mode)

A wireless client is associated or disassociated.

WLAN connected to AP
(for Client/Slave mode)

The AWK-1131A is associated with an AP.

WLAN disconnected
(for Client/Slave mode)

The AWK-1131A is disassociated from an AP.

RSTP changed

The RSTP topology has changed

RSTP new root bridge ID

The RSTP changes its root bridge ID

Client Roaming from previous AP to
current AP (for Client/Slave mode)

A client roams from a previous AP to the current AP if the signal
strength of the current AP is greater than the previous AP by a
certain value.

IP address conflict

The AWK-1131A has the same IP address as another device
connected to the same subnet.

Link fault pass-through LAN/WLAN
connected because of WLAN/LAN up

The WLAN/LAN link is up and the Link fault pass-through (LFPT)
enables the LAN/WLAN functionality.

«
...
43
44
45
46
47
...
»

Содержание AirWorks AWK-1131A



















































































Отзывы:

Нет отзывов

Похожие инструкции для AirWorks AWK-1131A

Бренд: X-Micro Страницы: 76

Бренд: CenturyLink Страницы: 14

Бренд: Caimore Страницы: 83

Бренд: Planet Страницы: 41

Бренд: WoMaster Страницы: 115

Бренд: Linksys Страницы: 17

Бренд: Ebyte Страницы: 21

Бренд: Ebyte Страницы: 22

Бренд: Ebyte Страницы: 26

Juplink RX4-1500

Бренд: Vanin Страницы: 2

Бренд: XtendLan Страницы: 23

Бренд: Redpine Signals Страницы: 42

Бренд: 2xWireless Страницы: 12

Бренд: 4IPNET Страницы: 18

Бренд: Comtrend Corporation Страницы: 92

Бренд: Comtrend Corporation Страницы: 88

WLAN Access Port 223x

Бренд: Nortel Страницы: 46

Бренд: AirLive Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды