Mountz SDC-24, Руководство по эксплуатации

Страница: 4 / 94

24) Time Limit for Fastening, Loosening & Motor Stall P60~62 39
25) Error Display Time Setting P74 39
26) Beep Sound ON/OFF P77 40
27) No Torque Complete Error P89 40
28) Fastening Complete Signal Out Time Setting
P90 40
29) Reverse Lock Setting P91 40
30) Trigger Start Setting P92 41
31) Reverse Start Setting P93 41
32) Bit Socket Tray Program Select
P94
41
33) Baud Rate Setting of RS232C P97
42
34) Preset # Selecting by Front Panel Key P115 42
7.6.5 Screw Counter Setting 43
35) Count Start(IN) & Finish(OUT) Signal Type
Ⅰ P80
43
36) Count Start(IN) & Finish(OUT) Signal Type
Ⅱ P81
43
37) Count Complete Signal Type
P82 44
38) Middle Count Number Setting P83 45
39) Input Pin #19 Sensor Signal Delay Time Setting P95 45
40) P82=2 Count Complete Time Setting
P116
45
7.6.6 Model Setting 46
41) Screw Count Number Setting for Each Model
P130~137 46
42)Select Model by 25P I/O Enable/Disable P138 46
43) Auto Sequence Enable/Disable P139 47
7.6.7 Driver Setting 47
44) Initial Preset# Display on the Front Panel
P9
47
45)Screw Type (Clockwise & Counter-clockwise)
P19
47
46) Password P75 47
46) Parameter Initialize to Factory Setting P76 48
1080 N 11th St - San Jose CA 95112 - mountztorque.com 4