![background image](http://html1.mh-extra.com/html/moulinex/compact-chef-ap1/compact-chef-ap1_manual_1840227008.webp)
10
supply meter. For safety reasons it is essential
to connect your appliance to an earthed socket
which complies with electrical standards.
Avoid any electrical installation which does not
comply with them.
Any error in connecting the appliance
invalidates the guarantee.
Make sure your electric meter and fuse box
are marked 10 Amps. or more.
Wiring instructions for U.K and Ireland
only :
APPLIANCES WITH FITTED PLUG
Important : For your convenience this
appliance is supplied complete with a plug
incorporating a 13 amp fuse.
In the event of replacing a fuse in the plug
supplied, a 13 amp fuse approved by ASTA
to BS1362 must be used.
If the socket outlets are not of the 13A BS 1363
type, and therefore do not accept the plug
connected to this appliance, cut off the plug.
When cut off, this plug is a shock hazard if
inserted into a socket outlet and must
therefore be disposed of safely.
Fit the appropriate plug according to the ins-
tructions in paragraph "Fitting a plug". With
alternative plugs a 15 amp fuse must be fitted
either in the plug or adaptor or at the main
fuse box.
FITTING A PLUG - IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
GREEN & YELLOW
: EARTH
BLUE: NEUTRAL - BROWN
: LIVE
As the colours in the mains lead of this
appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured GREEN &
YELLOW must be connected to the terminal
in the plug which is marked with the letter ‘E’
or by the earth symbol or coloured green
or green and yellow. The wire which is
coloured BLUE must be connected to the ter-
minal which is marked with the letter ‘N’ or
coloured black. The wire which is coloured
BROWN must be connected to the terminal
which is marked with the letter ‘L’ or coloured
red.
This appliance is manufactured to conform to
the Low Voltage Electrical Equipment (Safety)
Regulations 1989 and is designed to comply
with BS 3456. It complies with the EEC Di-
rective (89/336 EEC).
2/ Installation
Depending on the layout of your kitchen, you
can
- Place your mini oven on a kitchen unit or
work surface capable of withstanding
temperatures of at least 90 c without causing
any damage
or
- You can attach your oven to the wall. In this
case, obtain wall bracket reference 5-852-
130 from a Moulinex approved service
agent.
Never build it in or place it in a fitted unit.
Always ensure that there is nothing blocking
the air vents of the appliance. Do not lay
teatowels or plates on your oven.
3/ Safety recommendations
This is a domestic appliance designed for
cooking food only.
- Do not touch the hot surfaces of your oven
while the oven is on, in particular the glass
panel in the door.
- For safety reasons, keep children well
away from the oven
- Never rest dishes etc. on the oven door when
it is open, unless it is supported by a worktop
underneath.
- Do not line the oven with aluminium foil. This
may interfere with the thermostat and could
seriously damage your oven.
Before using your Oven
for the First Time
- Unpack, wash and carefully dry all
accessories.
- Turn the thermostat dial (F) to 270ºC and
operate using the oven function with nothing
inside it and the door open for 15 minutes.
This will get rid of the “new” smell.
Using your Oven
1/ Cooking using the Rotisserie
The rotisserie (spit) is for evenly roasting meat
and poultry.
- Set the thermostat dial (F) to the grill-
rotisserie position.
- Set the timer (H) to the desired cooking time.
Add about 4 minutes’ pre-heating time.
The indicator light (G) will come on.
- Pierce the joint for roasting with the spit (Q1)
- Hold the joint on with the forks, and tighten
the locking screws (Q2)
4
5
5b
5a