Figure 28: Inserting the Gland Nut on the Cable
a
Insert the split tightening cone from the side of the cable.
Figure 29: Inserting the Tightening Cone on the Cable
b
Insert the split rubber gland from the side of the cable.
Figure 30: Inserting the Rubber Gland on the Cable
IMPORTANT:
Ensure to select the correct gland size. The inner diameter of the
rubber gland must be within 5.8 mm to 6.8 mm or 8.88 to 9.8 mm range.
2
Insert the housing on to the RJ45 cable.
Figure 31: Inserting the Housing on to the Cable
a
Insert the holder section on to the front of the RJ45 cable.
MN007322A01-B
Chapter 3: SLX 5000 Installation
37
