Figure 13: Opening the Housing Lock
a
Put on the gland nut through the front end of the LC Duplex assembly.
Figure 14: Inserting the Gland Nut on the Cable
b
Insert the split tightening cone from the side of the cable.
Figure 15: Inserting the Tightening Cone on the Cable
c
Insert the split rubber gland from the side of the cable.
Figure 16: Inserting the Rubber Gland on the Cable
IMPORTANT:
Ensure to select the correct gland size. The inner diameter of the
rubber gland must be from 4.8 mm to 6.8 mm.
2
Pass the LC Duplex cable through the housing.
MN007322A01-B
Chapter 3: SLX 5000 Installation
33
