Motorola 2.1, Руководство по настройке сети

Страница: 34 / 135

Chapter 2: Network Setup
6
Observe the following prompt:
Do you want to use this machine as a DNS server?
Enter
yes
.
7
Observe the following prompt:
Do you want to continue with the installation of bind and associated files?
Enter
yes
.
If this prompt is not displayed, continue to Step 8.
8
Observe the following prompt:
The default DNS domain suffix to be used is
meshnetworks.net
Do you want to change this? [yes or no]
Enter
no.
9
Observe the following prompt:
Do you want to start the DNS server?
Enter
yes
.
10
Observe the following prompt:
Do you want to configure this machine to run a TFTP server? [yes or no]
Enter
yes.
11
Observe the following prompt:
Do you want to configure this machine to run a Time server? [yes or no].
Enter
No
.
12
Observe the following prompt:
Do you want to install the r0k daemon on this machine?
Enter
Yes
.
When you enter yes, you will be asked for the location of the r0k config file. The r0k
daemon is required when using EAP-TTLS Secure Mesh.
13
Observe the following prompt:
Starting installer for r0k daemon
./r0kd_install.sh
Enter binary installation directory [/opt/r0kd]:
Enter
/opt/MotoMeshDuo _setup/
.
It will show the install locations, and then prompt for the install start.
2-20