9A
9B
EN
EN
05. FUNCTIONS
P0 | SEMI-AUTOMATIC PROGRAMMING
P0 | AUTOMATIC PROGRAMMING
05. FUNCTIONS
This menu allows automatic programming of the engine and slowdown.
Note • This mode requires the use of limit switches.
During automatic programming, the engine performs the following maneuvers:
1 •
Slowly close the gate until it reaches the closing limit switch
2 •
Opens slowly for approximately 10 seconds
3 •
Close slowly until closing limit switch is reached
4 •
Opens gate at normal speed until reaching the opening limit switch
5 •
Close the gate at normal speed until it reaches the closing limit switch
Steps 2 and 3 are only performed if
[P2-Fd]
is set to a value equal to or greater than 1.
If
[P2-Fd]
is set to 0 (zero), you will only do steps 1, 4 and 5.
03
• Appears
[AU]
. Press
MENU
for 1 second to
start automatic
programming.
01
• Press
MENU
for 3
seconds.
02
• Appears
[P0]
.
Press
MENU
for 1
second.
04
• When
programming is
complete, the display
returns to the initial
state
[--]
.
This menu allows you to program the engine's working time in a semi-automatic way, allowing you to
manually define the moment when the slowdowns start.
In this way, we automatically set the value of Menu [P1] as well as reducing the inertia of the door
when it reaches the limit switches in programming.
If you do not press MENU at any time, a
automatic programming without Relanty during the course.
03
• Appears
[AU]
.
Press
UP
1 time to
show MA.
01
• Press
MENU
for 3
seconds.
02
• Appears
[P0]
.
Press
MENU
for 1
second.
04
• When
[MA]
appears, press
MENU
for 1 second.
The engine will initiate
a slow door close.
05
• When the closing limit switch is
reached or pressing the remote, it will
open automatically.
06
• Press
MENU
or another controller
as the command, when you want to
start the slowdown at the opening.
07
• When the closing limit switch is
reached or pressing the remote, it will
close automatically.
08
• Press
MENU
or another controller
as the command, when you want to
start the slowdown at the closing.
