MOSA Weld TS 400 YS, Руководство по эксплуатации и обслуживанию

Страница: 35 / 44

31/07/18 Manutenzione Periodica
Yanmar (TNV)_EN
ENGLISH
ENGLISH
REV
.0-07/19
maintenance intervals Daily
every
50 h
every
250 h
every
500 h
every
1000 h
every
1500 h
every
2000 h
every
3000 h
Check and refill engine coolant
○
50h
Check and clean radiator fins
○
Check and adjust cooling fan V-belt
○
1st time
○
2nd and after
Drain, flush and refill cooling system with new
coolant
◊
or every year
whichever
comes first
Adjust intake/exhaust valve clearance
●
Lap intake/exhaust valve seat
●
Check battery
○
Check engine oil level
○
Replace engine oil and filter
◊
1
1st time
◊
2
2nd and after
Inspect, clean and test fuel injectors, if necessary
●
Inspect turbocharger
●
Inspect, clean and test EGR valve
●
Clean EGR lead valve
●
Clean EGR cooler
●
Check and refill fuel tank level
○
Drain fuel filter/water separator
○
Check fuel filter/water separator
○
Clean fuel filter/water separator
○
Replace fuel filter
◊
Clean or replace air cleaner element
○ ◊
Overall visual check daily
○
MAINTENANCE SCHEDULED
YANMAR TNV
IMPORTANT
The engine and alternator manufacturers indicate specific maintenance and control intervals: it is obligatory to consult the
books, OPERATION AND MAINTENANCE of the engine and alternator provided with the generator you are using.
If such documents are not supplied with the generator set, ask for a copy to the customer service.
+
The information given in the table is only indicative. Specific instructions are given in the operation manuals.
○
=
Check
◊
=
Replace
●
=
Contact your authorized Yanmar industrial engine dealer or
distributor for these maintenance services
◊
1
=
IDI Models
◊
2
=
DI Models
40