MOSA Weld TS 400 YS, Руководство по эксплуатации и обслуживанию

Страница: 24 / 44

16/10/19 C1BQ3069_EN_10-19
ENGLISH
ENGLISH
M
32
CONTROLS DESCRIPTION
Pos. Description Function
9 c.c. socket (Only Gouging) Outlet used only for cutting works
9 c.c. welding sockets (+) Connection sockets for welding cables
10 c.c. socket only gouging Outlet used only for cutting works
T Welding current regulator Allows the regulation of the welding current
P Welding arc potentiometer Turning clockwise the arc control is increased
X1 Remote control (connector) Multiple connector for remote control.
O8 V/A digital instruments PCB The device shows welding and voltage current.
I3 Switch for welding scale reduction Placed on 50% it limits the maximum value of the welding current regulator (T), so permitting
a more accurate regulation of the welding current
AA Engine control unit "RGK 420SA" • Start and stop the machine
• Fuel level gauge
• Hour meter
• Battery voltage
• RPM
• Three phase and single phase voltage
• Frequency
• Display with texts and icons for management alarms
• Maintenance
• Texts for parameters and alarms in 5 languages (EN - IT - FR - ES - DE).
59A Engine thermal switch Protection against over-currents and short circuits in the engine electrical system.
R3 Siren Gen-set acoustic alarm.
L5 Emergency stop button To be pushed in case of danger. Immediate stop of the gen-set.
15 A.C. socket AUX sockets for load connection.
I2 48V (A.C.) socket 48V outlet
D Ground fault interrupter (30 mA) Device for protection against not-direct contacts for TN and TT systems (neutral grounded
to frame)
Z2 Thermal-magnetic circuit breaker Protects the system connected to the outlets from overcurrent and shortcircuit.
12 Earth terminal Ground connection point for gen-set.
REV
.0-10/19