MOSA Weld TS 400 YS, Руководство по эксплуатации и обслуживанию

Страница: 10 / 44

13/1
1/14 M2-5 (TS)_EN
ENGLISH
ENGLISH
M
2.5.2
SAFETY PRECAUTIONS DURING MAINTENANCE
Make use of qualified personnel to carry out maintenance and troubleshooting
It is mandatory to stop the engine before performing any main-
tenance on the machine.
Always use protective devices and suitable equipment.
Do not touch the engine, the exhaust pipes and the muffler
during operation or immediately after. Allow the engine to cool
before performing any operation
With the machine running pay attention to moving parts such
as fans, belts, pulleys.
Do not remove the protections and the safety devices unless
absolutely necessary, restore them after completion of the
maintenance or repair.
Do not refuel while the engine is running or hot.
Do not smoke or use naked flames when refueling.
Refuel only outdoors or in well ventilated areas.
Avoid spilling fuel, especially on the engine.
Clean and dry any leaks before restarting the machine
FUEL
Slowly unscrew the cap of the fuel tank and put it back always
after refueling.
Do not fill the tank completely to allow for expansion of the
fuel inside
Do not remove the radiator cap when the engine is running or
still hot, the coolant may spurt out and cause serious burns
Do not handle the battery without the use of protective gloves,
the battery fluid contains sulfuric acid, which is very corrosive
and dangerous
Do not smoke, avoid any naked flames or sparks near the
battery, the vapors exhaled could cause the battery to explode
SAFETY RULES
ENGINE DRIVEN WELDERS
REV
.0-01/18
10