![background image](http://html.mh-extra.com/html/mortara/eli-280/eli-280_user-manual_1836772036.webp)
EQUIPMENT PREPARATION
12
Loading Paper
Figure 2-2
1.
Remove packaging and cardboard backing from the paper stack.
2.
Facing the front of the device, use the release latch on the left side and slide the paper tray cover to the left.
3.
Place the stack of thermal paper into the paper tray such that the grid side of the paper is up when it is pulled
over the paper tray cover. The paper cue mark (a small black rectangle) should be in the lower left corner.
4.
Manually advance one page of paper beyond the closure point. Make sure the paper lays on the black roller
evenly within the channel of the paper door. If paper is not manually advanced evenly, risk of jamming or
queue faults increases.
5.
Slide paper tray cover to the right until the cover latches in a locked position. You will hear a sharp click when
the cover is properly latched.
WARNING:
Risk of injury to fingers in paper door or platen drive mechanisms.
NOTE:
For proper performance of thermal printer, be certain to use Buridck/Mortara/Quinton
recommended thermal paper.
Содержание ELI 280
Страница 5: ......
Страница 6: ......
Страница 26: ...INTRODUCTION 20 System Illustration Figure 1 1 Side View Figure 1 2 Writer Handle ...
Страница 32: ......