Operation 2018-10-21
Page16
6.
After Using the Unit
1.
Turn the unit off.
* The unit will automatically turn off after 10 minutes of non-use.
2.
Disconnect the probe cord from the unit and remove the file holder and contrary electrode from the probe
cord.
Do not pull directly on the cords when connecting or
disconnecting the probe and file holder. Always grip the
connectors to connect and disconnect cords.
Do not wrap the probe cord around the body of the unit.
Replacing Batteries
Replace the batteries as soon as the battery power indicator starts
flashing.
* To be on the safe side, replace the batteries when the battery
power indicator displays two lines.
Do not use the unit if the battery power display is flashing.
The unit may not function properly if the battery power is
low.
1.
Hold the cover and slide the catch on the bottom of the
module towards the display to release it.
2.
Slide the cover in the direction indicated by the arrow in the
diagram to take it off.
Catch
Cover
Canal Measurement Module
1
Cover
2
Cord
BAD
BAD
Содержание DENTA PORT ZX
Страница 2: ......
Страница 35: ......
Страница 36: ...2018 10 K 2 000 Pub No K093 80002 500 Printed in Japan...