Page9
Operation 2018-03-22
Setting and Changing Memory
Use the Mode Switch to select M1, M2 or M3. Use the Select switch to select sound volume and Apical Line.
Use the Set Switch to set the memory content.
Press Mode to select the memory.
Press
Press Select to select the item.
Press
(The display will briefly flash
on and off.
)
Press Set to set the memory content.
Press
M1
(Memory 1)
M2
(Memory 2)
M3
(Memory 3)
Root Canal
Measurement
Mode 1
Root Canal
Measurement
Mode 2
Root Canal
Measurement
Mode 3
Sound volume selected
Apical Line selected.
The apical line can be
set anywhere between
2 and Apex.
* All memory settings will be retained even after the unit is turned off. Simply select M1, M2, or M3 to
use those memory settings.
Check the settings displayed after selecting memories.
Alarm Sound Selection
In case 2 or more units are being used, there are two different sounds for the alarm so that you can tell one
from the other. To change the sound, hold down the Set switch and turn the unit on.
* The sound that signals switch operation will also change.
* The sound cannot be memorized separately by the three memories (M1, M2 and M3).
* Turn the unit off to save the selection.
Flashes
Apical Line
Flashes
Turn the sound off.
Set the sound volume
low.
Set the sound
volume high.
Содержание DENTA PORT ZX
Страница 2: ......
Страница 35: ......
Страница 36: ...2018 10 K 2 000 Pub No K093 80002 500 Printed in Japan...