Morita DENTA PORT ZX, Руководство по эксплуатации

Страница: 26 / 36

Operation 2018-03-22
Page22
Non-Autoclavable Components: Wipe with Neutral Detergent and Moistened Cloth
• Components maintained this way:
Canal Measurement Module
Procedure:
■ Cleaning
To clean the surfaces of the components, use a soft cloth to apply a little neutral detergent, and then rinse them
with a cloth moistened with water.

Do not use excessive amounts of detergent or water and do not soak the components.

Do not use paint thinner, benzine or similar solutions to clean the components.

Avoid spilling chemical solutions used for treatment on the components. These chemicals could
damage, deform or discolor the module. Use extra caution to avoid spilling formalin cresol (FC)
and sodium hypochlorite as they are quite strong. Wipe up any chemical spills immediately (Some
chemicals may leave traces even if wiped up immediately).
Cleaning