The Blade Assembly
Page 38
CREASING
9. Slide the new blade set into the slots of the creasing unit as shown in fig. 21.1.
The blade set can be fitted with the ANVIL at the bottom or with the ANVIL at the top.
The blade set is supplied from the factory with the ANVIL at the bottom as shown in
FIG22A.
The blade set can be changed to have the ANVIL at the top (as shown in FIG22B), this can
improve the repeatability of the fold relative to the crease for certain fold types or when
using lighter stocks.
Locate the blade extractor tools into the holes in the adjustment links as shown. Pull the
handles of the blade extractor tools upwards to engage the blade assembly back into the
power links.
10. Set the cam graphics for both ends of the blade / anvil to their lowest point on the
scale (ie. When the mark on the scale reaches the mark on cam holder) Fasten the socket
head screws on the adjustment cams until they are tight.
NOTE.
FIG 21.1
FIG22B
FIG22A
