Page 15
SYSTEM
Quick Start Guide
AutoCreaser Pro 50
6. Enter the Hinge Dimension.
7. Select the arrow button to highlight the Spine Offset and the Spine Width
dimensions.
8. Run the sheets of paper through the machine to make the Spine creases.
10. Select the arrow button to highlight the Hinge Dimension.
11. Run the sheets of paper through the machine to make the Hinge creases.
TO MAKE THE HINGE CREASES.
9. Remove the sheets of paper from the stacker tray.
,
and put them back onto the loading table.
TURN THE SHEETS OVER
MAKE SURE THAT THE LEAD EDGE
OF THE SHEETS POINT IN THE SAME DIRECTION AS BEFORE.
Hinge Dimension
