Morehouse 4215 Скачать руководство пользователя страница 7

Страница: 7 / 50

Morehouse Instrument Company, Inc.

1742 Sixth Ave., York, PA 17403-2675 USA

Phone: (717) 843-0081

www.mhforce.com

Page 7

Rev. 3/2022

4215-HS Indicator

Manual

(PM-4101)

Item Button

The Item button cycles through the list of different items that can be displayed (Load A, Peak A, Vall A, Load B,

Peak B, Vall B, Pos, Vel, Limits, and optional Avg A and Avg B). Use the Unit button to change the units that are

used for the currently displayed item.

Tare Button

The Tare button sets the current load to zero for channel A, channel B, or channels A and B. A submenu will

allow you to select what channel you want to tare. It does not matter what is being displayed when you press

this button. The load is always reset to zero. A single channel unit will automatically set Load A to zero.

Reset Button

The Reset button brings up a list of things that you might want to set to zero:

If this is a 2-channel unit, the following menu will appear:

> Reset Ch A + Ch B will reset the peak, valley, max, min for channels A and B.

> Reset Ch A Only will reset the peak and valley for channel A.

> Reset Ch B Only will reset the max and min for channel B.

> Reset Position will reset the position to zero.

> Reset Limits will reset any limits that require manual resetting.

For a single channel unit, the following menu will appear:

> Reset Peak+Vall will reset the peak and valley measurements.

> Reset Peak Only will reset the peak measurement.

> Reset Vall Only will reset the valley measurement.

> Reset Position will reset the position to zero.

> Reset Limits will reset any limits that require manual resetting.

Pressing either the “+” button or the “>“ button will scroll forward through this list. Pressing either the “-” but

ton or the “<“ button will scroll backward through the list. Pressing “Enter” will reset the currently displayed

item.

Pressing “Esc” will return to Run Mode without resetting anything. Note that all menu lists on the Model

4215-HS start with the “>“ symbol and that the Esc button will always back out of a menu without making any

changes.

Содержание 4215



















































Результаты поиска

Содержание 4215

Отзывы:

Похожие инструкции для 4215

Бренды по названию

Популярные бренды

Morehouse 4215, Руководство по эксплуатации и инструкция

Результаты поиска

Содержание 4215

Отзывы:

Похожие инструкции для 4215

Бренды по названию

Популярные бренды