Moore UNIDRILL 300, Руководство пользователя

Страница: 25 / 91

24
Settings
SETTINGS
Height setting
The coulter tip must be set approx. 20
mm back from the tip of the disc.
- It is imperative that the minimum
distance is complied with to protect the
coulter from shock damage.
This measurement can be finely adjusted
by placing a wooden block beneath the
coulter with the machine resting on a flat
surface.
NOTE: When using the seed drill on very
loose or trashy soil it is recommended
that you raise the coulter approx. 40 mm
above the disc to improve its mobility.
Tilt setting adjustment
The coulter’s cutting edge (1) must be:
- Parallel to the disc.
- As close to the disc as possible without
limiting it’s rotation.
If the disc does eventually block, the
coulters settings must be adjusted. By
adjusting the tightness of screws
(A) and
(B), one can either increase or reduce
the distance between the coulter and the
disc make sure that the coulter’s cutting
edge always remains parallel to the disc.
- Use the screws
(C) to lock the coulter.
Set the coulters with the machine resting on the ground.