Moore UNIDRILL 300, Руководство пользователя

Страница: 23 / 91

22
Settings
SETTINGS
Adjusting with the calculator
- This calculator enables you to determine
the new variator setting after carrying
out your first calibration test.
- Adjust the distribution settings and
carry out a test according to the
recommendations issued in the
previous page. Remember to weigh
both trays.
Use:
- Match line
(1) (the variator marker
setting used for your first calibration
test) with line
(2), which corresponds to
the quantity (in Kg) collected in the trays
during the test.
- Without moving the discs on the
calculator, identify the required
sowing rate setting on the Kg/ha line
(3)
- Read the new recommended variator
setting off line
(4) , according to your
sowing and tillage conditions.
- After sowing a hectare carryout another
check.
- If you wish to change the sowing rate per
hectare, using the same seeds, to sow
another plot of land, you can use the
calculator again to determine the new
variator setting, working on the basis of
the quantity you obtained for the first
calibration test