Moore UNIDRILL 300, Руководство пользователя

Страница: 15 / 91

Position 1
Position 2
14
Starting up
To unhitch the seed drill, set the machine in the working position
HITCHING
Trailed drills
Hitching Height
The height of the hitching point greatly
affects the machines correct operation
(+/- 450 mm)
- The hitching point must importantly be
fixed. The lower linkage bar cannot be
used in this case.
- Low hitching heights should be
preferred, such as the pick up hitch or
clevis drawbar especially for direct
sowing.
- The clevis drawbar is recommended
when using dual wheels or wide tyres
to make manoeuvres at the field ends
easier.
Locking the drawbar
2 drawbar locking positions are available.
- Position
(1) is the normal working
position.
- Position
(2) is used if position (1) is
ineffective on hard ground, or if the
seed drill’s penetration is insufficient.