Moore UNIDRILL 300, Руководство пользователя

Страница: 37 / 91

MAINTENANCE Section 4
1.
Before all maintenance, service or repairs and when trying to identify a breakdown
or malfunction you must ensure that the power drive is disconnected and that the
engine is switched off and the ignition key removed.
2.
Check Tightness of screws and nuts. Retighten if necessary. (Especially Transport
Wheels).
3.
Before maintaining a machine in the raised position, support it by appropriate means.
4.
Before replacing a working part, wear protective gloves and only use the appropriate
tools.
5.
To protect the environment, it is forbidden to throw or pour out oils, grease and
filters of any description. They should be given to firms specialising in their
disposal.
6.
Before undertaking any electrical work on the tractor or attached machine disconnect
the alternator cable and the battery.
.
7.
Protective covers which are prone to wear should be checked regularly. Replace
immediately if damaged.
8
. Spare parts must conform to the manufactures specification. Only use genuine
Moore parts.
9.
Before working on any electrical circuit disconnect the power source.
10.
Repairs carried out on parts under tension or pressure (springs or components under
pressure etc) require specialist knowledge and tooling so should only be carried out
by qualified personnel.
11. In the winter time leave the base flap fully open so any rodents can escape otherwise
they will chew through a peg wheel to get out.
12. Do not leave any seed in the machine after the drilling season is finished
36