manualshive.com logo in svg

Monterey 214SS, Руководство пользователя

Монтерей 214SS - это легкое и мощное судно, способное принести незабываемые впечатления от катания по воде. Для того чтобы узнать все возможности и преимущества этой модели, необходимо скачать бесплатное руководство владельца на manualshive.com. Этот подробный мануал поможет вам освоить все тонкости управления и обслуживания этой лодки.

Поделиться
Скачать
background image

178

MONTEREY

  

BOATS

Routine Maintenance

Karadon Surfaces

A mild liquid detergent and water or ammonia-
based cleaners will remove most dirt and stains 
from Karadon.  For heavy cleaning, oil, and grease, 
use Fantastik® spray cleaner.  Rinse with a clean 
cloth moistened with fresh water.  Wipe dry with 
a clean cloth.  

In most cases, Karadon can be repaired if ac-
cidentally damaged.  Minor damage, including 
scratches, general or chemical stains, scorches or 
burns, and minor impact marks, can be repaired 
with a light abrasive cleanser and a Scotch-Brite® 
pad.  For heavier damage, light sanding and ma-
 >  
dealer or a professional.

• Avoid 

exposing 

Karadon 

to 

strong 

chemicals, 

such as paint removers, oven cleaners, etc.  If 
ZK >
water.

•  Remove nail polish with a non acetone-based 

  K 

•  Do not cut directly on Karadon counter tops.

13.4  Bilge and Engine Compartment

To keep the bilge clean and fresh, use a commer-
cial bilge cleaner regularly.  Follow the directions 
carefully.  The engine and engine compartment 
should be kept clean and free of oil accumulation 
and debris.  All exposed pumps and metal compo-
nents, including the engine and drive gear, should 
be sprayed periodically with a protector to reduce 
the corrosive effects of the high humidity always 
present in these areas.

Maintenance intervals are outlined in the engine 
owner’s manuals.  Their recommendations should 
be followed exactly.

Periodically check the bilge pump for proper opera-
  >  K
switch.  Inspect all hoses, clamps and thru-hulls 
for leaks and tightness on a regular basis and 
operate all thru-hull valves at least once a month 
to keep them operating properly.

%K>    
located in the deck near the engine compartment.   
Periodic inspection and cleaning of the ventila-
tion ducts is necessary to ensure adequate air 
circulation.  

Engines

Proper engine maintenance is essential to the 
proper performance and reliability of your inboard 
engines.  Maintenance schedules and procedures 
are outlined in your engine owner’s manual.  They 
should be followed exactly.

Proper engine operation requires a good supply 
of clean, dry fuel.  Improper marina fuel storage 
techniques, limited boat usage, etc. can cause the 
fuel to become contaminated.     

The age of fuel can affect engine performance. 

 

Chemical changes occur as the fuel ages that can 
cause deposits and reduce the cetane or octane 
rating of the fuel.  Severely degraded fuel can 
damage the engine and boat fuel tank and lines.  
Therefore, if your boat is not being run enough to 
require at least one full tank of fresh fuel a month, 
a fuel additive should be added to protect it from 
degradation.  Your dealer or the engine manufac-
turer can provide additional information on fuel 
degradation and fuel stabilizers recommended for 
your engine. 

In many states, most gasoline is blended with 
ethanol alcohol.  Ethanol is a strong solvent and 
can absorb water during periods of storage.  You 
should refer to the engine operating manual for 
information regarding alcohol blended fuels and 
how it affects the operation of your marine engine.

Generator (Optional 328SS)

The engine maintenance required on the generator 
is similar in many ways to the main engines.  The 
engine incorporates a pressure-type lubrication 
system and a fresh water cooled engine block 
which is thermostatically controlled.  

The seawater cooling system on the generator is 
 Z   
system components from galvanic corrosion.  The 
anode should be inspected when the generator is 
serviced and replaced when it is 75% of its original 
size or at least once each year.  

The most important factors to the generator’s lon-
gevity are proper ventilation and maintenance of 
the fuel system, ignition system, cooling system, 
lubrication system and the AC alternator.  

Maintenance schedules and procedures are out-
lined in your generator owner’s manual.  They 
should be followed exactly.

Содержание 214SS





















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 214SS

Oru Kayak COAST XT Assembly Manual preview
COAST XT
Бренд: Oru Kayak Страницы: 21
NRS GigBob Owner'S Manual preview
GigBob
Бренд: NRS Страницы: 8
Boston Whaler 190 Montauk 2018 Owner'S Manual preview
190 Montauk 2018
Бренд: Boston Whaler Страницы: 88
Boston Whaler 170 Super Sport 2018 Owner'S Manual preview
170 Super Sport 2018
Бренд: Boston Whaler Страницы: 90
Stiga 75-1160-19 Assembly & Instruction Manual preview
75-1160-19
Бренд: Stiga Страницы: 12
S/C Yachts Yachts SC 420 Instruction Manual preview
Yachts SC 420
Бренд: S/C Yachts Страницы: 10
DE WIT WORKBOATS Esquire 35 Owner'S Manual preview
Esquire 35
Бренд: DE WIT WORKBOATS Страницы: 42
elv E-XP-1 User Manual preview
E-XP-1
Бренд: elv Страницы: 40
ElDeBo 1997 Electrec Powered Pontoon Boat Owner'S Manual preview
1997 Electrec Powered Pontoon Boat
Бренд: ElDeBo Страницы: 24
Lagoon 410-S2 Owner'S Manual preview
410-S2
Бренд: Lagoon Страницы: 39
Yamaha WaveRunner VXR 2018 Owner'S/Operator'S Manual preview
WaveRunner VXR 2018
Бренд: Yamaha Страницы: 108
Yamaha WaveRunner VX Riding Practive Manual preview
WaveRunner VX
Бренд: Yamaha Страницы: 214
Carver Yachts 560 Voyager SE Setup preview
560 Voyager SE
Бренд: Carver Yachts Страницы: 3
Mainship 40 Trawler Single Operator'S Manual preview
40 Trawler Single
Бренд: Mainship Страницы: 170
Classic Accessories Bozeman Owner'S Manual preview
Bozeman
Бренд: Classic Accessories Страницы: 18
Klepper AERIUS 490 Assembly Manual preview
AERIUS 490
Бренд: Klepper Страницы: 36
Cobalt Digital Inc A40 Owner'S Manual preview
A40
Бренд: Cobalt Digital Inc Страницы: 136
Cobalt Digital Inc A25 BOWRIDER Owner'S Manual preview
A25 BOWRIDER
Бренд: Cobalt Digital Inc Страницы: 126

Бренды по названию

Популярные бренды

Загрузить еще бренды