manualshive.com logo in svg

Monterey 214SS, Руководство пользователя

Монтерей 214SS - это легкое и мощное судно, способное принести незабываемые впечатления от катания по воде. Для того чтобы узнать все возможности и преимущества этой модели, необходимо скачать бесплатное руководство владельца на manualshive.com. Этот подробный мануал поможет вам освоить все тонкости управления и обслуживания этой лодки.

Поделиться
Скачать
background image

171

MONTEREY

  

BOATS

Routine Maintenance

Anodized Aluminum Surfaces

Anodized aluminum should be washed periodi-
cally with soap and water to keep it clean.  If the 
boat is used in saltwater or polluted water, the 
aluminum should be washed with soap and water 
after each use.  Saltwater allowed to remain on 
anodized aluminum will penetrate the anodized 
coating and attack the aluminum. 

If your boat is used in saltwater and equipped 
   
it will require special attention to the anodized 
  =  
to salt build up from salty condensation and sea 
spray.  It is also frequently overlooked when the 
boat is washed and will not be rinsed by the rain.  
 Z          
is more likely to become pitted than the exposed 
aluminum on the structure.  Make sure the alumi-
num in this area is washed frequently with soap 
and water and rinsed thoroughly.  Pay particular 
attention to places where the top material contacts 
the frame. 

Once a month coat the entire frame with a metal 
protector made for anodized aluminum to protect 
against pitting and corrosion caused by the harsh 
effects of saltwater.  Do not use automotive or boat 
wax designed for paint or gel coat on anodized 
aluminum.  The wax can contaminate the alumi-
num and damage the anodized surface.  

CAUTION

 "+!% < '<) &+<<+  << <=
 '% < '<) )&&+=@  <+>+_ '<)
&+<<+#)"<#"<!+)""+_
STEERING WHEELS AND OTHER AREAS WHERE A GOOD GRIP 
AND SURE FOOTING IS IMPORTANT.

Stains can be removed from anodized aluminum 
  =
minimize corrosion, use a caulking compound or 
= K     >  
mounted to aluminum fabrications.  If the anod-
ized coating is badly scratched it can be touched 
up with paint.  With proper care, anodized alumi-
num will provide many years of service.

Powder Coated or Painted Aluminum

Powder coated or painted aluminum should be 
washed periodically with soap and water to keep it 
clean.  If the boat is used in saltwater or polluted 
water, the aluminum should be washed with soap 

and water after each use.  Saltwater allowed to 
remain on powder coated or painted aluminum will 
penetrate the coating and attack the aluminum, 
usually around fasteners and hardware mounted 
to the aluminum. 

If your boat is used in saltwater and equipped 
   
 Z    
  =  
from salty condensation and sea spray.  It is also 
frequently overlooked when the boat is washed 
and will not be rinsed by the rain.  Consequently, 
             
to become pitted than the exposed aluminum on 
the structure.  Make sure the aluminum in this 
area is washed frequently with soap and water 
and rinsed thoroughly.  Pay particular attention to 
places where the top material contacts the frame.  

Once a month check for damage, scratches and 
corrosion, particularly around fasteners and hard-
ware.  Nicked or badly scratched paint and powder 
coating can be sanded and touched up with enamel 
paint.  Corrosion around fasteners will have to be 
sanded, then touched up with paint.  The fasteners 
 Z    
= K     >  >
the aluminum and prevent damage to the paint 
or powder coating when the fastener is installed.  
Periodically applying automotive or boat wax to 
the surface will provide additional protection from 
the harsh effects of saltwater.

Always repair scratches, nicks and corroded areas 
as soon as possible.  Corrosion left unaddressed 
will lift the paint or powder coating, allowing 
moisture to travel between the coating and the 
aluminum causing the corrosion to spread below 
the coating and damage the aluminum.  

If excessive chipping and peeling occurs, it could 
be an indication of an electrical fault in the boat or 
aluminum fabrication.  You should contact a quali-
            -
mediately and correct the problem if you suspect 
that your boat may have a fault in the aluminum 
frame.  You should also contact Monterey Boats 
Customer Service.

Содержание 214SS





















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 214SS

Pakayak Rudder Installation Instructions preview
Rudder
Бренд: Pakayak Страницы: 4
Sportsman Tournament 214 SBX Owner'S Manual And Quick Reference Manual preview
Tournament 214 SBX
Бренд: Sportsman Страницы: 38
Hobie mirage Pro Angler Manual preview
mirage Pro Angler
Бренд: Hobie Страницы: 28
Hobie Mirage Drive Manual preview
Mirage Drive
Бренд: Hobie Страницы: 36
Cape Dory 270 Owner'S Manual preview
270
Бренд: Cape Dory Страницы: 94
J 105 Owner'S Manual preview
105
Бренд: J Страницы: 52
Peinert 25 Quick Start Manual preview
25
Бренд: Peinert Страницы: 4
SEVEN BASS DESIGN IMPAKT 160 Manual preview
IMPAKT 160
Бренд: SEVEN BASS DESIGN Страницы: 50
LaserPerformance DART 16 Manual preview
DART 16
Бренд: LaserPerformance Страницы: 10
LaserPerformance Laser 4.7 Rigging Manual preview
Laser 4.7
Бренд: LaserPerformance Страницы: 15
Pelican IPVUEKJP12-2 Assembly Instructions preview
IPVUEKJP12-2
Бренд: Pelican Страницы: 3
Pelican Monaco Owner'S Manual preview
Monaco
Бренд: Pelican Страницы: 10
AKONA DRIFTER Owner'S Manual preview
DRIFTER
Бренд: AKONA Страницы: 12
FAREAST S/V14 Manual preview
S/V14
Бренд: FAREAST Страницы: 18
Ranger 2180 BAY RANGER Owner'S Manual preview
2180 BAY RANGER
Бренд: Ranger Страницы: 78
Feathercraft K2 Expedition Double Manual preview
K2 Expedition Double
Бренд: Feathercraft Страницы: 31
Rave Sports Bongo 10-Foot Owner'S Manual preview
Bongo 10-Foot
Бренд: Rave Sports Страницы: 16
Yamaha XL760W Owner'S/Operator'S Manual preview
XL760W
Бренд: Yamaha Страницы: 122

Бренды по названию

Популярные бренды

Загрузить еще бренды