manualshive.com logo in svg

Monterey 214SS, Руководство пользователя

Монтерей 214SS - это легкое и мощное судно, способное принести незабываемые впечатления от катания по воде. Для того чтобы узнать все возможности и преимущества этой модели, необходимо скачать бесплатное руководство владельца на manualshive.com. Этот подробный мануал поможет вам освоить все тонкости управления и обслуживания этой лодки.

Поделиться
Скачать
background image

174

MONTEREY

  

BOATS

Routine Maintenance

The following are typical stains and cleaning 
tips for interior marine vinyl:

•  Dry soil, dust and dirt, dried on dirt - Remove 

with a soft cloth.   Wash with a soft cloth or 
nylon brush dampened with water.

• Variations 

in 

surface 

gloss 

- 

Wipe 

with 

a 

water 

dampened soft cloth and allow to air dry.

•  Stubborn dirt - Wash with a soft cloth or soft 

nylon brush dampened with Ivory Soap® and 
water.  Rinse with clean water.

•  Stubborn spots and stains - Spray with  Tan-

nery Car Care Cleaner® and rub with a soft 
cloth.  Rinse with clean water.

•  Liquid spills - Wipe immediately with a clean 

absorbent cloth.  Rinse with clean water.

•  Food grease and oily stains - Spray immedi-

ately using either Fantastik Cleaner® or Tan-
nery Car Care Cleaner®, wiping with a soft 
cloth.  Take care not to extend the area of 
contamination beyond its original boundary. 

 

Rinse with clean water. 

Additional Warnings for Vinyl Fabrics

• 

Detergents should not be used on a regular or 
repeated basis for normal cleaning.

•  Powdered abrasives, cleaners containing 

abrasives, steel wool and industrial strength 
cleaners are not recommended for vinyl. 

 •  Any lacquer solvent will cause immediate, ir-

reparable damage to the vinyl.

• 

Wax should never be used on any vinyl uphol-
stery, as it will cause premature embrittlement 
and cracking. 

• 

Dilute chlorine bleach before using.  Never use 
at full strength.

— €> K       -

pentine or varsol are used for cleaning, then 
only small quantities should be employed in a 
well ventilated area.  Exercise proper care by 
advising any personnel in the area and keep 
away from any ignition source.  Always wear 
protective gloves.  

Marine Interior Fabrics

Spot clean only with water based shampoo or foam 
upholstery cleaner.  Pretest a small, inconspicu-
ous area before proceeding.  Do not over wet.  Do 
not use solvents to spot clean.  Pile fabrics may 
require brushing with a nonmetallic, stiff bristle 
brush to restore appearance.  

NOTICE: 
Water extraction or steam cleaning is not 

a recommended cleaning method.  Cushion 
covers should not be removed and laun-
dered.  

To prevent overall soiling, frequent vacuuming or 
light brushing with a nonmetallic, stiff bristle brush 
to remove dust and grime is recommended.  When 
cleaning a spill, blot immediately to remove spilled 
material.  Clean spot or stains from the outside to 
the middle of the affected area to prevent circling.  

Use a professional furniture cleaning service when 
an overall soiled condition has been reached.  

Marine Exterior Vinyl Upholstery with 
PreFixx® Coating

Monterey Boats uses OMNOVA white, smoother and 
embossed pleated vinyl material with PreFixx top 
coating.  All other accent embossed white and colored 
vinyl requires different care and maintenance.  

PreFixx Cleaning Instructions

PreFixx is engineered so that upholstery can be 
cleaned again and again without showing signs 
of wear.  With easy cleanablility, proven stain 
     ^ ŠXX    -
ish can reduce maintenance costs and frequent 
reupholstery.

Durability

Creates a barrier that resists stains from penetrat-
ing to the surface of the vinyl for proven, long-
lasting protection.  With laboratory-tested stain 
resistance and improved wear properties, BoltaS-
oft® upholstery treated with PreFixx protective 
 › ‚ œ  

Easy Maintenance

Enables most common stains like dirt and smudg-
  >> > -
point ink also can be cleaned with active solvents, 
such as nail polish remover, without damaging 
 ^ ŠXX  „    
cleaning instructions are followed).

Содержание 214SS





















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 214SS

Hermes Yachting Alice Bavaria Cruiser 51 2016 Operation Manual preview
Alice Bavaria Cruiser 51 2016
Бренд: Hermes Yachting Страницы: 25
SKEETA FOILING CRAFT Nikki 5.5 Rigging Manual preview
Nikki 5.5
Бренд: SKEETA FOILING CRAFT Страницы: 32
SKEETA FOILING CRAFT NIKKI Rigging Manual preview
NIKKI
Бренд: SKEETA FOILING CRAFT Страницы: 32
buster M Owner'S Handbook Manual preview
M
Бренд: buster Страницы: 257
Sailfish 272 CC Owner'S Manual preview
272 CC
Бренд: Sailfish Страницы: 60
WaterQuest 14' Square Stern Owner'S Manual preview
14' Square Stern
Бренд: WaterQuest Страницы: 8
Zodiac YACHTLINE 490 Owner'S Manual preview
YACHTLINE 490
Бренд: Zodiac Страницы: 44
Ockelbo B18 AL Owner'S Manual preview
B18 AL
Бренд: Ockelbo Страницы: 64
Meridian Yachts 490 PILOTHOUSE Owner'S Manual preview
490 PILOTHOUSE
Бренд: Meridian Yachts Страницы: 88
Oru Kayak Beach LT Owner'S Manual preview
Beach LT
Бренд: Oru Kayak Страницы: 16
Sea Ray 40 Sundancer Specific Information Manual preview
40 Sundancer
Бренд: Sea Ray Страницы: 46
Sea Ray 38 Sundancer Specific Information Manual preview
38 Sundancer
Бренд: Sea Ray Страницы: 44
Sea Ray 360 Sundancer Owner'S Manual preview
360 Sundancer
Бренд: Sea Ray Страницы: 158
Sea-doo 2001 RX Shop Manual preview
2001 RX
Бренд: Sea-doo Страницы: 351
Sea-doo 4-TEC series 2008 Shop Manual preview
4-TEC series 2008
Бренд: Sea-doo Страницы: 555
Sea-doo 2003 GTI LE RFI Shop Manual preview
2003 GTI LE RFI
Бренд: Sea-doo Страницы: 779
RS SAILING RS Tera Rigging Manual preview
RS Tera
Бренд: RS SAILING Страницы: 43
Pro-Line Boats 2005 29 Super Sport Owner'S Manual preview
2005 29 Super Sport
Бренд: Pro-Line Boats Страницы: 31

Бренды по названию

Популярные бренды

Загрузить еще бренды