Monroe MR-180, Инструкция по эксплуатации

Страница: 24 / 44

20
TAX
(Continued)
__________________________________________________________________
ZERO PRICE
Allows a "0" price to be entered for a department or PLU. Ordinary operation does not accept a "0" price.
1. Move the Selector Switch to the "PRG" position.
2. To permit the entry of zero price, enter [8] , then [1] , followed by the [RA] key.
3. To prohibit zero price entry, type [8] , then [0] , followed by the [RA] key. Note this is the default setting .
TAXING Departments
Example: Program Department 1 as taxable, using Tax Rate 1, multiple entry and pre-set price of 1.99:
1. Move the Control Switch to the "PRG" position.
2. Enter [0] or [1] 0 = Multiple Sales 01 = single item
3. Enter ( S2 Code) [2-digit #] from the Tax Rate Chart.
4. Press the [CHECK] key.
5. Enter [Pre-set Price] . If you do not wish to program a department pre-set price, enter "0", this will work only if you
have allowed for “0” price entry.
6. Press the
[DEPARTMENT] key.
Repeat these steps for each department you will be using.
Example: Enter [0] Enter [01] Press [Check] Enter [199] Press [Department 1]
NON-TAXABLE Departments
Example: Program Department 2 as non-taxable, multiple entry and no pre-set price:
1. Move the Selector Switch to the "PRG" position.
2.
Enter [0] for Multiple Item Sale, then enter [00] for no tax. Press the [CHECK] key.
3.
Enter [0] for no pre-set price, then press the [DEPARTMENT 2] key.
Example: Enter [0] Enter [00] Press [Check] Enter [0] Press [Department 2]