Monroe MR-180, Инструкция по эксплуатации

Страница: 20 / 44

16
PROGRAM the DATE and TIME
__________________________________________________________________
To print the date at the top of each receipt, journal record or management report you must program the date. Time, when
programmed may also be displayed by pressing the
[QTY/TIME] key.
To program the time to print at the bottom of the receipt, program the time. The time will automatically print and display in the
24 hour format. The time prints in the following format: HH•MM. For example: 9:30, the receipt will print 9-30.
As long as the back-up batteries are installed and have charge, the date and time will update automatically.
Set the Date:
1. Move the Selector Switch to the "PRG". If a security code has been programmed, enter the code and press the
[CHARGE] key. If a security code was not programmed proceed to Step #2.
2. Use the numeric pad to enter the current date. Use MMDDYY. NOTE: Enter a leading zero [0] if the month and
day are single digit.
3. Press the [ST/#/NS] key.
4. Continue programming or move the Selector Switch out of the PRG position.
Example : Set a date of April 17, 2004
Enter Press: Display Print:
041704 [ST/#/NS] 417.04 04·17·04
Date Format: The date will automatically print in the following format: MM-DD-YY (Month-Day-Year). For
example: 04·17·04.
Set the Time:
1. Move the Control Switch to the "PRG" position. If a security code has been programmed, enter the code and
press the [CHARGE] key. If a security code was not programmed proceed with Step #2).
2. Use the numeric pad to enter the current time using the following format: HHMM.
3. Press the [QTY/TIME] key to store the time.
4. Continue programming or move the Selector Switch out of the PRG position.
Example : Set the time at 3:30 PM: (with 24 hour format)
Enter Press: Display: Print:
1530 [QTY/TIME] 15·30 15-30