Monroe MR-180 Скачать руководство пользователя

Страница: 16 / 44

QUICK START

__________________________________________________________________

Quick Start allows you to operate the MR-180 quickly using the most basic features of your new cash register. Do
not skip over the preceding pages however, loading paper, installing batteries, etc.

Again, read and follow the instructions contained on prior pages. Reminder: It is important that the register

is plugged in before the back-up batteries are installed.

2. Quick Start programming procedures:

A. Open the printer compartment and place the selector switch at the PRG (Program) position.

B. If you have programmed a security code, enter the security code and press the

[CHARGE]

key. If you are starting

here, no security code has been programmed, so go to step C.

C. Set the current date by typing the numeric keys to represent the

month/day/year

. Single digits must be preceded

by a zero. For example, to set April 17, 2004, type

[041704]

. Finalize by pressing the

[ST/#/NS]

key.

D. Set the current time using the 24-hour clock format. For example: to set 9:15 A.M., enter

[0915]

; to set 7:15 P.M.,

type

[1915]

. Finalize this entry by pressing the

[QTY/TIME]

key.

E. Set the decimal point as follows (U.S. standard): Enter

[1]

[2]

and press the

[RA]

key.

If you are not going to program Tax Rates, Assign Clerks, Program Departments, or use some of the other features

move the Selector Switch to Reg 1 or Reg 2 and start normal operation (Number 3 below).

F. To set a fixed Tax Rate: Enter

[1]

for tax rate #1, then press the

[Tax Shift]

key. Then enter the tax rate as a 4-

digit number. For example, if your tax rate is 8%, enter

[8000]

; if your tax rate is 7.5%, enter

[7500]

. Then press

the

[Amt Tend/TOTAL]

key.

Please note for the next steps you will use the Department Keys which are the keys (1-8) located directly to the right of
the numeric keys.

G. In these examples, we will program the register to accept a zero price; press

[8]

[1]

and then press the

[RA]

key.

H. Program Department 1 as taxable. Enter

[0][0][1]

, press

[CHECK]

, enter

[1][0][0]

and press the

[Department 1]

key. Repeat this procedure for all departments you wish to tax.

I. Program Department 2 as non-taxable items. Enter

[0][0][0]

, press

[CHECK]

, Enter

[1][0][0]

and press the

[Department 2]

key. Repeat this procedure to all the departments you wish not to tax.

J. Basic programming is now complete.

3. To begin, slide the selector switch to the R1 or R2 position (R1 winds a Journal Record on the spindle, whereas R2

gives you Customer Receipts through the window opening). Follow the instructions given in "Examples".

4. To print Management Reports, slide the control switch to the X or Z position, then press the

[Amt Tend/TOTAL]

key.

Содержание MR-180













































Результаты поиска

Содержание MR-180

Отзывы:

Похожие инструкции для MR-180

Бренды по названию

Популярные бренды

Monroe MR-180, Инструкция по эксплуатации

Результаты поиска

Содержание MR-180

Отзывы:

Похожие инструкции для MR-180

Бренды по названию

Популярные бренды