Monroe MR-180, Инструкция по эксплуатации

Страница: 12 / 44

8
ERROR SUMMARY
__________________________________________________________________
THE ERROR ALARM will sound under certain conditions.
Pressing the wrong key for a specific type of entry or an error when programming will cause the error alarm to sound. "E"
appears in the display and the keypad locks. An error tone will also sound if a function not programmed is attempted.
To clear, simply press the [C] Clear key.
NOTE: If you move the Control Switch from "R1" or "R2" to another position and you have not completed the
transaction an error condition will occur reminding you to total the transaction.
To Clear an Error:
1.
Press [C] . The error tone will end.
2. Review to determine what error was made.
3. Continue the transaction, or if you are in the program mode, continue with programming.
NOTE: The
[C] Clear key is also used to clear an incorrect entry from the display prior to pressing a function key (live entry).
Once printed, [VOID] must be used to correct the error.
To Void an Error:
Once an amount is printed on the tape, the
[C] Clear key cannot be used. Use the [VOID] key to correct an error just
printed.
1. Voiding the Entry Just Completed:
If the transaction has not yet been completed, and an incorrect entry has just printed, simply press the [VOID] key to
erase the entry. The entry is reprinted with a "VD" symbol following the amount and erased from the transaction.
2. Voiding an Earlier Entry:
To void an entry (not one just entered):
1. Total the transaction.
2. Press the [VOID] key.
3. Re-enter the incorrect information.
4. Total the transaction (this will erase the incorrect entry.)