Monroe MR-180, Инструкция по эксплуатации

Страница: 17 / 44

13
QUICK START
__________________________________________________________________
There are many useful functions that can be programmed to enhance accountability within your business. Take time to
review the Instruction Manual in it’s entirety for a more complete description of these capabilities.
Tips:
Make certain the MR-180 is plugged in prior to installing the batteries.
Know the difference between the “X” and “Z” reports, i.e., the “Z” report clears all data after it prints (there is no
going back if you run out of paper in the process, one of your clerks accidentally runs the report, etc.)
When assigning security codes to Clerks, clerks without security codes will be blocked from operation.
Assigning a security code for programming and the “Z” reports protects both the programs loaded and prevents
accidental clearing of the data.
GENERAL INFORMATION
- It is not necessary to re-program the entire machine to make a single program change or correction. If you wish to
make a change, such as an update on state tax rate, be sure you are in the program mode, then re-do the program in
question. A new program entry will automatically override a previous entry.
- Remember; you enter the program mode by moving the Control Switch to the PRG position.
- Be sure to slide the control switch to the "Off" position at the end of a business day.
- In order to assure continuous battery back-up protection, it is important that the batteries be changed at least once
every year.