Moneris smartselect, Руководство по эксплуатации

Страница: 38 / 198

Configuring Your Terminal
28 SmartSELECT Merchant Operating Manual v 2.0
4.4: The Terminal Configuration Menu
The Terminal Configuration Menu contains a list of parameters and programs that
can be enabled and configured on the SmartSELECT terminal.
IMPORTANT:
A number of these programs require agreements
between the merchant and a service provider
other than Moneris Solutions. Please ensure that
the necessary agreements are in place before
attempting to configure those programs on the
terminal.
The parameters and programs are listed in Table 1: SmartSELECT Configuration
Parameters in the order they appear on the
Terminal Configuration
menu with
the section in this manual that describes them.
Table 1: SmartSELECT Configuration Parameters
TERMINAL CONFIGURATION
PARAMETER REFER TO SECTION #
FOR DETAILED INSTRUCTIONS
General Parameters 4.5: General Parameters
Dial Communications
4.7: Communications Parameters
Clerk Subtotalling A.1: Clerk Subtotalling Configuration
Multi-terminal Report Setup B.1: Configuration
Set Default Clerk ID A.1: Clerk Subtotalling Configuration
Clerk ID Maintenance A.1: Clerk Subtotalling Configuration
Enter Training Mode 5.1: Enter Training Mode
Print Configuration
4.11: Printing Configuration Parameters
Cheque Authorization F.1: Configuration
Purchasing Card D.1: Configuration
Third Party Host E.1.1: Third Party Host
Third Party Card E.1.2: Third Party Card
Screen Control 4.6.1: Screen Control
Printer Control
4.6.2: Printer Control
Gift Card Configuration G.2: Terminal Configuration for ValueLink
Remote Code Download 4.12: Remote Code Download
Restore Factory Defaults 4.13: Restoring Factory Defaults
Reward Program I.1: AIR MILES Configuration
ERNEX Configuration H.2: Ernex Configuration