Moneris smartselect, Руководство по эксплуатации

Страница: 148 / 198

ERNEX Electronic Marketing Programs
138 SmartSELECT Merchant Operating Manual v 2.0
The PINPad is not used for ERNEX transactions even when Tip Entry on PINPad
is enabled. The PINPad displays the prompt
WELCOME/BONJOUR
throughout
the transaction.
The following instructions are for a SmartSELECT set up with a
Swipe Customer
Card
Idle screen.
H.1: Ernex Screen Format
The style of the screens that appear when you process Gift Card transactions are
slightly different from the style of the rest of the SmartSELECT screens. The but-
tons and keys on the Gift Card screens function in the same manner and are in the
same location, but have square, not rounded, corners.
H.2: Ernex Configuration
Prior to processing ERNEX E-Gift or Loyalty Card transactions, the SmartSE-
LECT terminal and the ERNEX Host must be set up
H.2.1: Terminal Configuration for ERNEX
This must be performed on each terminal that will be processing ERNEX transac-
tions.
From the Idle screen:
1. Press
Menu
.
2. Press
Config
.
3. Select
ERNEX Configuration
.
4. Select
ERNEX Routing Code
.
IMPORTANT:
Only change this code if instructed to do so by
the ERNEX Help Desk.
5. Key in the ERNEX Routing Code (default is 67) and press
Enter
.
6. Press
Exit
twice to return to the Idle screen.
To disable ERNEX
If ERNEX is enabled on the SmartSELECT you can disable it. The terminal will
not process ERNEX transactions after disabling ERNEX.
From the Idle screen:
1. Press
Menu
.
2. Press
Config
.
3. Scroll down and select
ERNEX Configuration
.
4. Select
Disable ERNEX Application
.
5. Press
Exit
twice to return to the Idle screen.