Moneris smartselect, Руководство по эксплуатации

Страница: 118 / 198

Private Label Transactions
108 SmartSELECT Merchant Operating Manual v 2.0
To change an existing Third Party Host parameter
From the Idle screen:
1. Press
Menu
. The
Financial Transactions
menu appears.
2. Press
Config
. The
Terminal Configuration
menu appears.
3. Scroll down and select
Third Party Host
. The
Select Host Number
prompt
appears.
4. Select the
Host #
of the Third Party Host you wish to change. The
Third
Party Host Setup Host #_
menu appears.
5. Select the parameter you wish to change. The appropriate prompts will
appear.
6. When the
Third Party Host Setup Host #_
menu reappears, press
Exit
to
save the changes.The
Select Host Number
menu reappears.
7. Press
Exit
to return to the
Terminal Configuration
menu.
To deactivate a Third Party Host
Any Third Party cards assigned to a Third Party Host must be unassigned before
the Third Party Host can be deactivated.
From the Idle screen:
1. Press
Menu
. The
Financial Transactions
menu appears.
2. Press
Config
. The
Terminal Configuration
menu appears.
3. Scroll down and select
Third Party Host
. The
Select Host Number
prompt
appears.
4. Select the
Host #
of the Third Party Host you wish to deactivate. The
Third
Party Host Setup Host #_
menu appears.
5. Press
Clear
. The
Remove Host #_?
prompt appears.
6. Select
Yes
to clear the entry for this host. The
Select Host Number
prompt
reappears. The Host Number that has been deactivated displays a status of
Empty
.
7. Press
Exit
. The
Terminal Configuration
menu reappears.
The SmartSELECT terminal can no longer communicate with the Third Party
Host and any Third Party Cards associated with that Host can no longer be used
on the terminal.
E.1.2: Third Party Card
Use this function to enable the SmartSELECT to accept Private Label cards.
If the Private Label card is processed by a host other than Moneris, you must first
configure a Third Party Host (see section
E.1.1: Third Party Host ) then configure
the Third Party Card and use the Host that you’ve configured.
A maximum of 20 cards can be set up.