Moneris smartselect, Руководство по эксплуатации

Страница: 97 / 198

SmartSELECT Merchant Operating Manual v 2.0 87
Appendix B: Multi-Terminal Reporting
This appendix outlines the procedures for enabling Multi-terminal Reporting and
processing reporting transactions when this feature has been enabled.
Multi-Terminal Reporting is composed of two functions:
• Multiple Terminal Batch Closing allows you to close, by Terminal name,
any terminals associated with the same Merchant ID number as the terminal
on which you are performing the Close Batch.
• Multiple Terminal Deposit Totals allows you to obtain deposit totals, by
Terminal name, for any terminals associated with the same merchant number
as the terminal on which you are performing the Close Batch.
In order to process multi-terminal reports you must have:
• more than one terminal associated with your Merchant ID
• each terminal must be named
• each terminal must have
Close Batch/Balance Allowed?
enabled
B.1: Configuration
The following instructions all begin at the
Terminal Configuration
menu. To
access this menu:
• from the Moneris Logo screen, press
Menu
, then
Config
• from the Idle screen, press
Menu
then
Config
B.1.1: Multiple Terminal Setup
This function sets up multiple terminal reporting on your SmartSELECT, allows
you to assign Terminal names to your terminals and allows the named terminal to
perform the Close Batch transaction.
To assign a Terminal Name
You must assign a terminal name to each terminal associated with the Merchant
ID number and you must perform the name assignment on the terminal that is
being named. You cannot assign a terminal name to a terminal from another termi-
nal.
A maximum of 100 terminal names can be associated with one Merchant ID num-
ber. Duplicate terminal names are not allowed within a Merchant ID number.
From the Idle screen:
1. Press
Menu
. The
Financial Transactions
menu appears.
2. Press
Config
. The
Terminal Configuration
menu appears.
3. Select
Multi-Terminal Report Setup
. The
Swipe Admin Card
prompt appears.