Molecular Devices SkanWasher 300, Руководство пользователя

Страница: 31 / 78

SkanWasher 300 User Guide 21
Chapter 5: Operation
Starting a Wash Program
Step 1 Edit or create wash program using the Edit Program through Setup
Main Menu.
Step 2 Verify appropriate liquid is in reservoir bottle.
Step 3 Verify connections.
‹
Verify reservoir bottles are connected to Inlet and Rinse port and
pressurized.
‹
Verify waste bottle is connected to Waste port.
Step 4 Prime system.
‹
Place sample microplate on the microplate holder.
‹
Check pattern on the side of microplate holder to verify that the
holder is in the correct plate configuration.
‹
Press
[Rinse]
key to enter prime program.
‹
Press
[Start]
.
z
Prime program will prime both Rinse and Inlet channels.
‹
Repeat 3 times.
Step 5 Choose Wash Program.
‹
Press Program key from control panel (Program LED will illumi-
nate).
‹
Select a Wash program using the ¿À Arrow keys to move cur-
sor to previously created/edited program.
‹
Press
[Enter]
.
&
TIP:
‹
Program mode can be entered
only when system is Ready.
(Ready LED will illuminate).
‹
If system is in Setup menu, press
Setup
key to return to Main Menu.
‹
To exit the Program mode with-
out selecting a program, press the
[
Program
]
key.